Parts List
1-Wire Outdoor Temperature/Humidity Sensor Kit

The parts list is organized by quantity and part type. Verify that all parts are present by checking in the box provided as you locate the part in the list. You may wish to take this opportunity to sort the parts into a compartmented container such as an egg carton or muffin tin as you inventory them. This will aid in building the kit.

Capacitors

Capacitors may be marked in various ways. The typical markings are listed but may vary. Find all that match and the remaining ones, if any, should become apparent by elimination.

Mylar or Monolithic
Ok
Qty
Description Reference
 
1
0.001 uf (102) C2
Tantalum
Ok
Qty
Description Reference
 
1
1uF (105 or 1uF) @ 35V C1

Diodes

NOTE: Verify the diodes against this list. If at all possible, leave them sealed in the bag.

Ok
Qty
Description Reference
 
2
BAT42 Schottky Diode D1/D2, D3

Integrated Circuits

NOTE: Do not handle the ICs at this time! Verify the ICs against this list. If at all possible, leave them sealed in the bag.

Ok
Qty
Description Reference
 
1
HIH-3610-001 Humidity Sensor U2
 
1
DS2438 (A/D SMD) 8-pin SOIC U3
 
2
DS18S20 Temp Sensor (TO92 case) U1,U4

Connectors

Ok
Qty
Description Reference
 
1
2x3-pin (6 pins) male header JP3
 
3
Push-On shunt T1, T2, H
 
2
RJ-11 6-4p connector, PCB mount J1, J2
 
1
2-pin rt-angle header P1
 
1
2-pin female header shell  
 
2
header shell pin  

Miscellaneous

Ok
Qty
Description Reference
 
1
Fan, Shicoh 0610-12HH  
 
4
1" threaded (6-32) aluminum spacers  
 
8
6-32 x ¼" round head machine screws  
 
2
Ferrite Beads L1, L2
 
1
Printed Circuit Board  

Next Step