Order Tray | Contact Us | Home | SIG Lists

[aprssig] DTMF Weather telemetry

Andrew Rich vk4tec at hotmail.com
Sun Aug 15 21:51:14 UTC 2004

u use the "valid character" pin

You get "3" valid pin -break- "3" valid pin <break> etc etc

Andrew Rich (VK4TEC)

>From: "Scott Miller" <scott at 3xf.com>
>To: "'Andrew Rich'" <vk4tec at hotmail.com>,"'TAPR APRS Mailing List'" 
><aprssig at lists.tapr.org>
>CC: <ozaprs at marconi.ics.mq.edu.au>
>Subject: RE: [aprssig] DTMF Weather telemetry
>Date: Sun, 15 Aug 2004 09:45:26 -0700
>Sure, but your data rate is somewhat limited.  I think the minimum symbol
>time is 40 ms, so that's 25 characters per second, 4 bits per character, so
>100 bits per second.  If you're lucky.  You still need to worry about 
>say you've got a long run of '3's - the tone isn't going to change.  You
>need a clock at the receiver synced to the transmitter's clock to know 
>each character starts.
>-----Original Message-----
>From: aprssig-bounces at lists.tapr.org
>[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Andrew Rich
>Sent: Saturday, August 14, 2004 11:56 PM
>To: TAPR APRS Special Interest Group
>Cc: ozaprs at marconi.ics.mq.edu.au
>Subject: [aprssig] DTMF Weather telemetry
>Has anyone ever used DTMF to send telemetry ?
>Wind 278 deg Speed 015 Temp 027
>Or even APRS ?
>27*34*45A = 27.34.45B (assuming * = . and A = North and B = South)
>153*06*21C = 153.06.21E ( assuming * = . and C = West and D = East)

Protect your inbox from harmful viruses with new ninemsn Premium. Go to   

More information about the aprssig mailing list