[aprssig] D700/D7 Programming

[J. Moen (K0ZXU/6)]

Good advice.  I played with the Demo version of Link700 and was able to cut
and paste memories.

When I get the time, I'm planning to write a simple VB program to share
memories among the free Kenwood memory control programs (in my case
MCP-2000, MCP-D700 and MCP-D7G).    The formats of the saved files are not
identical, but they appear to be quite similar and reformatting from one to
the other should not be difficult.  I was hoping to have found such a
utility on the internet, but the closest is the pay-for Link700, and the
cost is reasonable.

----- Original Message ----- 
From: "bpsmicro.com" <lists.nospam at bpsmicro.com>
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
Sent: Friday, August 20, 2004 6:38 PM
Subject: Re: [aprssig] D700/D7 Programming


> I invested in the Link700 shareware program, which has D7 & D700 support
> (plus a few others) in the one package. It allows you to have separate
> profiles for the two radios, but copy n' paste between them. It's the
least
> painful way to do what you want, but the software is a wee bit klunky.
> Still, probably a good bet for $35.
>
> Learn more, and get the demo version from:
> http://www.wa3hrl.com/link700/index.html
>
> Brad.
> VE3BSM
>
> ----- Original Message ----- 
> From: "Ron" <rgilson at adelphia.net>
> To: "TAPR APRS Special Interest Group" <aprssig at lists.tapr.org>
> Sent: Fri August 20, 2004 20:21
> Subject: [aprssig] D700/D7 Programming
>
>
> > After enjoying my D700 I just got a D7.  Anyone have a simple way of
> cloning
> > a D7 from a D700 or copy from the D700 programming file to a D7 file for
> > latter up loading ??   I realize that the D700 has more frequency range
> but
> > I really don't need 220 or 1296 in my portable.  Thanks
> > WA2WWK
> > Ron
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>