[aprssig] MacAPRS_carbon

[Dennis Hudson]

No, I think most consumer PAT/NAT routers will pass telnet data on that 
port but www.aprs.net is not a good server.

try a regional igate that's local to you from 
http://www.aprs-is.net/APRSServers.htm

first.aprs.net
second.aprs.net  <running on a mac cool!
third.aprs.net
fourth.aprs.net


On Dec 13, 2004, at 6:57 PM, David Chesser wrote:

> I followed the procedure below but no stations appear, I have Comcast 
> cable  and only one IP address unless I pay an additional $5 a month 
> per IP so I use a router for my computers on my  home network.  Is 
> this causing the problem?
>
> On Dec 12, 2004, at 9:24 PM, Brian B. Riley 
> wrote:<Settings->Ports->Show List.pdf>
>
>>
>> I simply dropped my MacAPRSx ito the same folder that the Classic 
>> version
>> had been running under and then did what Steve said below ... That 
>> much
>> worked fine, now if they will get the serial ports working and right 
>> click
>> to select a specific area I will be really happy!
>>
>>
>> On 12/12/04 9:41 PM, "Steve Dimse" <k4hg at tapr.org> wrote:
>>
>>> On 12/12/04 at 8:32 PM David Chesser <dchesser55 at comcast.net> sent:
>>>
>>>> I have downloaded the MACAPRS Carbon version and don't know how to
>>>> connect to the APRSservr network. It used to be you needed TGE tool
>>>> with system 9 but when I try connect it doesn't work
>>>>
>>> Settings->Ports->Show List
>>>
>>> pick a server and click open.
>

--
Dennis Hudson, N2LBT
Sysop APRSALY
http://n2lbt.com:14501
Albany, NY