[aprssig] Weather data format problem
Matt Werner kb0kqa at gmail.comThu Dec 23 06:48:48 UTC 2004
- Previous message: [aprssig] Weather data format problem
- Next message: [aprssig] New n-N and 28 versus 30
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
On Wed, 22 Dec 2004 23:35:05 -0600, AB9FX <ab9fx at aprs.pl> wrote: > > According to the APRS spec on the TAPR website > > (Chapter 12, page 64, dated 29Aug 2000), temperatures > > below zero are expressed with a negative sign in front > > of them, so my temp is being reported correctly on > > APRS. > > I think there should be three digits for temperature. If below zero as -01 > to -99 not -1 Andy is correct - On page 64 it also says "Temperatures below zero are expressed as -01 to -99". The 0 is necessary according to the spec. If you look at my raw data (http://www.findu.com/cgi-bin/raw.cgi?call=kb0kqa&time=1) you will see that my negative values, when they are single digit negatives, are reported by xastir as -07 instead of -7. Right now the temps are in the double digit negatives (burr) so you'll have to look back a little bit in the raw data. 73 - Matt
- Previous message: [aprssig] Weather data format problem
- Next message: [aprssig] New n-N and 28 versus 30
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
