[aprssig] Fixing HID problems on APRS!
Robert Bruninga bruninga at usna.eduSun Jul 25 01:01:46 UTC 2004
- Previous message: [aprssig] HID packets
- Next message: [aprssig] Fixing HID problems on APRS!
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Richard, if you want to announce that you are operating both a BBS and a KA node on the APRS frequeency then put that info in your APRS POSITION COMMENT field or in your APRS STATUS packet. That is what those fields are for. Do *not* also send out an HID packet EVERY 10 minutes which is just useless QRM to everyone and everything else on frequency. It is just an innefficient use of the channel and was never intended for there to be HID packets on APRS. The ONLY reason APRS decodes HID packets is so that you can use APRS to monitor OTHER channels and see what is out there... HID packets should not be on APRS. de Wb4APR, Bob >>> ramirault at erols.com 7/24/04 8:42:47 PM >>> ----- Original Message ----- From: "Robert Bruninga" <Subject: [aprssig] Fixing HID problems on APRS! > Seeing over 50 HID's per hour (Counting dupes this > is as many as 200 per hour), this is an abomination on > 144.39 just in my area. This is a BIG problem that we > need to fix now. (rest snipped) Bob, this seems like another instance of where we disagree. In most cases I would agree with you, but I run APRSDos, and I re-enable HID manualy every time I re-start the program. WHY? Well, you've said many times that APRS was designed for "real time tactical" operation. It's not a far jump from "tactical" to "emergency" use. I have my station set up to be useful during a total loss of commercial power. The radio and TNC will be powered by a 12v size 27 "deep cycle" battery. The computer that runs APRS will not be powered. I have set my TNC's mailbox to be available, and set the TNC's KANode as well. Both of these could be quite valuable during an blackout when "normal" communication channels are out. BUT if I have HID set to off, how will folks know that this resource is available? As a "backup" I have set the Beacon to once every 60 min and to use the standard APRS "quit" beacon (somewhat confusing during 'normal' times, but very valuable during emergency times) Richard Amirault N1JDU Boston, MA, USA www.erols.com/ramirault "Go Fly A Kite" _______________________________________________ aprssig mailing list aprssig at lists.tapr.org https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
- Previous message: [aprssig] HID packets
- Next message: [aprssig] Fixing HID problems on APRS!
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
