[aprssig] delay program

[Gerhard F5VAG]

A similar question had been asked recently in the SIG were you would
expect to find AGW questions (and answers).

Here the answer:

<QUOTE>
Hi Ron,
 
 
Try this program.... it's been tested and approved.... ;o)
 
http://www.rjlsoftware.com/software/utility/delayexec/default.shtml
 
 
Regards,
 
 
 
Andrew B. Longdale, MCSE
Corporate Network Services
Talon Computer Systems
http://www.talonsys.com <http://www.talonsys.com/> 
403.619.5800

  _____  

From: Ron Stordahl N5IN [mailto:ron.stordahl at digikey.com] 
Sent: July 15, 2004 11:35 AM
To: SV2AGW at yahoogroups.com
Subject: [SV2AGW] Startup program delay needed


I am using AGWPE V2002.308 program starup feature to start UIDX, a 
program to send DX Spots as UI packets.  All of this runs on the same 
computer that hosts AR-Cluster, the program UIDX gets its dx spots 
from.

But AR-Cluster is rather slow to start, thus I would like to delay 
the startup of UIDX by at least 30 seconds.

It would be very convenient if AGWPE startup programs option allowed 
one to specify a delay time (in seconds) for each program it starts.

Lacking this can anyone point me to another way to add specific 
delays to starting programs in the Windows startup folder?

Ron, N5IN

</QUOTE>

--
73 de Gerhard, F5VAG / DL7MW
APRSFR: http://france.aprs2.net
 

> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org
> [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Michael Mullikin
> Sent: Friday, July 30, 2004 2:10 PM
> To: TAPR APRS Mailing List
> Subject: Re: [aprssig] delay program
> 
> 
> I am aware of this but the probem seems to be that some of the programs 
> that agw start start faster than AGW and then have problems finding 
> AGW.  so am looking for away to have AGW up and running before it loads the 
> other programs.
> 
> Mike
> At 09:27 PM 7/29/2004, you wrote:
> >AGWPE can start programs.  You should place the programs you want run in this
> >AGWPE option instead of the windows startup folder.  Then after agwpe is 
> >running,
> >it will launch any apps listed.  Click on the icon in task bar and see the 
> >menu
> >item called STARTUP PROGRAMS.
> >
> >Wes
> >
> >On Thu, 29 Jul 2004 20:02:44 -0400, Michael Mullikin wrote:
> >
> > >
> > > Hi All
> > >
> > > A while back there was some discussion on delaying start up programs used
> > > by AGW so tha the packet engine would be fully loaded before the rest of
> > > programs were run.
> > > Well I thought i would never need anything like that so never 
> > saved.  Now I
> > > do since i am trying to run agw paclink telpak and ui-view or xastir all
> > > from agw.   So any help would be appreciated..
> > >
> > > Thanks  Mike
> > >
> > >
> > >
> > > _______________________________________________
> > > aprssig mailing list
> > > aprssig at lists.tapr.org
> > > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> >
> >
> >ham callsign: kd4rdb
> >find me: http://wesvan.zapto.org
> >
> >_______________________________________________
> >aprssig mailing list
> >aprssig at lists.tapr.org
> >https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig