Order Tray | Contact Us | Home | SIG Lists

[aprssig] USB and Rs-232 GPS's

Robbie - WA9INF mwrobertson at comcast.net
Fri Jul 30 19:13:16 UTC 2004


I found an Etak USB for 20 bucks at a hamfest.. It shows up on my laptop 
as port #3, I flipped the switch for NMEA and let UI-View32 run my D-700 
in KISS mode.. Works like a charm, so I am tracking and I am able to see 
all the APRS traffic and WX around me, providing I catch WX bulletins 
from an I-Gate...

I seem to remember using WinAPRS with my D-700 in the car, and hitting 
Cntrl E to make the GPS data come out the serial port into WinAPRS.. The 
D-700 will spit the data out the RS-232 port while WinAPRS is running 
the TNC. Not in APRS mode...

It can be done...

Robbie

Chuck Gooden wrote:
> Could some one tell me if a hockey puck GPS that has a USB can 
> be converted to use RS-232.  I have heard USB is just a serial 
> protocol that can supply power and ground but I did not think it had 
> the same voltage levels as RS-232. Is this correct?
> 
> I have seen some USB GPS's on ebay and am considering buying 
> one to use with my D700 for aprs but it is USB instead of RS-232 
> output.
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 






More information about the aprssig mailing list