Order Tray | Contact Us | Home | SIG Lists

[aprssig] Re: Alinco DR-135T (TNC) Resetting

M. Schneider msokla at brightok.net
Tue Nov 2 18:43:18 UTC 2004


Jeff, I've had this problem with my DR-135, and did a little experimenting.
To make a long story short, I found that if you have the radio connected to
a constant power source (in my case it's wired directly to the vehicle
battery), and use the port on the back of the radio (connected to an
ignition-switched 12 volt power source) to turn the radio on and off, then
the problem goes away.  Or if you have the radio wired to the constant power
source but must turn it on and off using the front panel power switch, take
the radio out of APRS mode first, then turn it off.  A constant power source
seems to be a must, it seems the minute you lose power to the radio the
internal TNC can get "stupid".

Hope this helps,
Mark Schneider - K5MAR

>
> Message: 15
> Date: Tue, 2 Nov 2004 08:22:21 -0500
> From: "Jeff Kelly" <jkelly at bellatlantic.net>
> Subject: [aprssig] Alinco DR-135T (TNC) Resetting
> To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
> Message-ID: <001e01c4c0de$fc8c1c90$6401a8c0 at dell620comp2>
> Content-Type: text/plain; charset="iso-8859-1"
>
> My Alinco DR-135T with internal TNC is resetting it's
> internal tnc memories about every 2 weeks.  It is mobile
> and fires up with the car power.  A Digitraveler is feeding it.
>
> Does anyone have experience with this and have a way
> of preventing this?
>
> Thanks,
>
> Jeff
> KT2K







More information about the aprssig mailing list