Order Tray | Contact Us | Home | SIG Lists

[aprssig] Re: Alinco DR-135T (TNC) Resetting

Edwards, Chris cedwards at trane.com
Tue Nov 2 19:16:19 UTC 2004


The same thing happens in my pico tnc. I have to keep the power to it so
that it doesnt loose it's brain....

Chris AE4XO

-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Jeff Kelly
Sent: Tuesday, November 02, 2004 2:01 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] Re: Alinco DR-135T (TNC) Resetting


Thank you everyone for all the comments on the Alinco.
I will rewire the power so that the radio gets 12v all the time
and use the remote on/off feature of the radio to turn it on and off.

thanks!

Jeff

> I found that if you have the radio connected to
> a constant power source (in my case it's wired directly to the vehicle
> battery), and use the port on the back of the radio (connected to an
> ignition-switched 12 volt power source) to turn the radio on and off, then
> the problem goes away.


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig




More information about the aprssig mailing list