[aprssig] New wxpage.cgi
russ at wxqa.com
Wed Nov 24 07:19:02 CST 2004
You need to go to this site,
and fill out the form and then things should work the next evening. Note on
this page there is a sign-up for a discussion list for the data quality
Your callsign is your identification on findu.com and your NWS ID (AP032) is
your identification in the MADIS quality checking process. This is the same
process that is used for NWS surface data so that's why the term NWS ID.
The MesoWest link is to another seperate quality checking process that is
run by the Western Region of the NWS. MADIS sends the CWOP data to
MesoWest. They also use the NWS ID to identify stations in their process.
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Dave Kaplan
Sent: Wednesday, November 24, 2004 12:24 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] New wxpage.cgi
At 12:52 AM 11/24/2004, you wrote:
Steve Dimse wrote:
I am putting the final touches on the new version of the wxpage cgi,
here is the
test URL, let me know if you find any problems:
If the station you are viewing are forwarding your data to NOAA through
(as mine does), you will find a link appearing to the daily quality
graphs for that station.
If I try to check my data quality from the FINU web page I get taken to:
and get the following message:
This site is not being monitored for data. The site has been registered,
but the registration has not been confirmed.
So then I check using http://www.findu.com/cgi-bin/wx.cgi?call=AP032 and
Sorry, no weather reports found for AP032 in the 24 last hours
But yet http://www.met.utah.edu/cgi-bin/droman/meso_base.cgi?stn=AP032
shows my data quality good
What is the difference between these pages and why do I show up with good
data quality on one page and the other says I never send any data and am not
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig