[aprssig] Delorme Street Atlas USA with

[Andrew Rich]

we need a software repositry

-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of William McKeehan
Sent: Friday, 10 September 2004 2:08 AM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] Delorme Street Atlas USA with


I have taken some time to play with this idea and have had some successful
results.

I wrote some Perl script which reads a stream of APRS data from one of the
TIER2 servers and waits for a GPS packet from a particular callsign - when
it
finds it, it strips everthing except the NMEA sentence from the packet and
sends the NMEA sentence to a connected TCP/IP port.

I have Delorme running connected to COM6:. COM6: is redirected to the TCP/IP
port with the perl server by using a demo copy of "Serial/IP Redirector" by
Tactical Software.

Basically, what this gives me is the ability to monitor a remote GPS unit
using  DeLorme or other software that reads NMEA data from a serial port.

I would like to find an open source replacement for the Serial/IP Redirector
piece to run under Windows. Anyone have any suggestions?

> On Sun, 22 Aug 2004, William McKeehan wrote:
>
>> Would it be possible to take the output from an APRS-IS stream, filtered
to
>> a
>> single station, transform the information that flows out into a NMEA
stream
>> that could then be redirected to Delorme (via something like Lantronix
>> Redirector) to allow the real-time trackig of a single station on Delorme
>> software?

--
William McKeehan
Internet: mckeehan at mckeehan.homeip.net
http://mckeehan.homeip.net

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig