[aprssig] Actually, the WIDE2-1,WIDE1-1 solution!
Wes Johnston aprs at kd4rdb.comFri Apr 1 18:29:53 UTC 2005
- Previous message: [aprssig] Actually, the WIDE2-1,WIDE1-1 solution!
- Next message: [aprssig] Actually, the WIDE2-1,WIDE1-1 solution!
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Whoa Nelly.... What happens when the digi in the next town digipeats a packet that is W2-2? it comes out as W2-1, and my home station will digipeat it....along with everyone else's... not good. Wes Robert Bruninga wrote: >>>>bruninga at usna.edu 4/1/05 12:41:46 PM >>> >>>> >>>> >>>That is why my WIDE0-1,WIDE1-1 seems like it should >>>work fine. ... >>> >>> > >BUT IT WONT WORK. Just tried it and the KPC-3 >doesnt like the "WIDE0-1". OK, so I tried the following >and it *does* work! So here would be the proposal >for those areas that still want to have lots of home-digis. > >1) We eliminate RELAY completely. >2) Any FILL-IN digi that used to be a RELAY if it really is > needed, will change his RELAY alias to "WIDE2-1" >3) All DIGIS eliminate RELAY and fully support WIDEn-N >4) The recommended 2 hop mobile path in these areas is: > >VIA WIDE2-1,WIDE1-1 > >All DIGIS and all fill-in home WIDE2-1 digis will respond >to the first hop and only the real digis will respond to the >following WIDE1-1. > >And in the remote areas where 3 hops are acceptible >then mobiles can use the WIDE2-1,WIDE2-2 path if >they really think they are that important. > >But remember, this is ONLY For those areas that still think >that home station digis are required in their area. I don't >think in most of the USA this is really needed so the general >recommendation for mobiles remains just WIDE2-2 or maybe >WIDE3-3 out in the real boonies. And if locals want then >they can support the WIDE2-1 home digis. > >But lets get rid of the multiplication DUPE problem of RELAY >now... This new idea of replaceing it with the home station >alias of WIDE2-1 should make those areas happy, and let >the rest of us get on with the job of eliminating the dupe >multiplying RELAY... > >Will this work? >Bob >WB4APR > > >_______________________________________________ >aprssig mailing list >aprssig at lists.tapr.org >https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.tapr.org/pipermail/aprssig/attachments/20050401/67c07ec6/attachment.htm
- Previous message: [aprssig] Actually, the WIDE2-1,WIDE1-1 solution!
- Next message: [aprssig] Actually, the WIDE2-1,WIDE1-1 solution!
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
