Order Tray | Contact Us | Home | SIG Lists

[aprssig] how to implement 'No more relay' for dummies- settings for ui-digi

Brian Webster bwebster at wirelessmapping.com
Wed Apr 6 01:19:04 UTC 2005


Can anyone point me to a web page that will show settings for ui-digi to set
it up properly to use the new wide-n scheme?



Brian, N2KGC


-----Original Message-----
From: Wes Johnston [mailto:aprs at kd4rdb.com]
Sent: Tuesday, April 05, 2005 1:15 PM
To: TAPR APRS Mailing List
Subject: [aprssig] how to implement 'No more relay' for dummies


Short and to the point (I hope)....  I know some of these threads get
long and people begin to glaze over... here is the summary:

----------------------------------------------------------------------
If you are a home station....
and you use a real TNC in serial mode Change the TNC parameter MYA from
RELAY to WIDE1-1

or you use UI-View with a TNC in KISS mode, simply remove RELAY as a
supported alias and replace it with WIDE1-1.

or you use WINAPRS, change your TNC startup file and replace MYA RELAY
to MYA WIDE1-1 .

----------------------------------------------------------------------
If you are a mobile station....
change your outbound path to WIDE1-1,WIDE2-1 or WIDE1-1,WIDE2-2

WIDE2-2 will work everywhere, but you'll loose the ability to bounce
packets off someone's house when you are in the boonies.

----------------------------------------------------------------------
If you are a digi owner...
you don't have to do anything!

After a transition period, you may wish to drop the word RELAY from your
UIDIGI list.

Wes


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig







More information about the aprssig mailing list