Order Tray | Contact Us | Home | SIG Lists

[aprssig] how to implement 'No more relay' for dummies- settingsfor ui-digi

hasan schiers schiers at netins.net
Wed Apr 6 12:04:46 UTC 2005


Go the the UI-View32 mailing list page at Yahoo (the groups area). You will 
find an article explaining it "by the numbers". I wrote it.

73,

...hasan, N0AN
----- Original Message ----- 
From: "Brian Webster" <bwebster at wirelessmapping.com>
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
Sent: Tuesday, April 05, 2005 8:19 PM
Subject: RE: [aprssig] how to implement 'No more relay' for dummies- 
settingsfor ui-digi


> Can anyone point me to a web page that will show settings for ui-digi to 
> set
> it up properly to use the new wide-n scheme?
>
>
>
> Brian, N2KGC
>
>
> -----Original Message-----
> From: Wes Johnston [mailto:aprs at kd4rdb.com]
> Sent: Tuesday, April 05, 2005 1:15 PM
> To: TAPR APRS Mailing List
> Subject: [aprssig] how to implement 'No more relay' for dummies
>
>
> Short and to the point (I hope)....  I know some of these threads get
> long and people begin to glaze over... here is the summary:
>
> ----------------------------------------------------------------------
> If you are a home station....
> and you use a real TNC in serial mode Change the TNC parameter MYA from
> RELAY to WIDE1-1
>
> or you use UI-View with a TNC in KISS mode, simply remove RELAY as a
> supported alias and replace it with WIDE1-1.
>
> or you use WINAPRS, change your TNC startup file and replace MYA RELAY
> to MYA WIDE1-1 .
>
> ----------------------------------------------------------------------
> If you are a mobile station....
> change your outbound path to WIDE1-1,WIDE2-1 or WIDE1-1,WIDE2-2
>
> WIDE2-2 will work everywhere, but you'll loose the ability to bounce
> packets off someone's house when you are in the boonies.
>
> ----------------------------------------------------------------------
> If you are a digi owner...
> you don't have to do anything!
>
> After a transition period, you may wish to drop the word RELAY from your
> UIDIGI list.
>
> Wes
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 






More information about the aprssig mailing list