Order Tray | Contact Us | Home | SIG Lists

[aprssig] New n-N settings for ui-digi

Ron Stordahl ron.stordahl at digikey.com
Wed Apr 6 15:40:33 UTC 2005


Bruce et al

I did some quick remote sysop access to a nearby UIDIGI site and find 
that some of the relevant commands in your list are not valid, at least 
with UIDIGI 1.9 Beta 3, which is the lastest release.

UIDigicall is too long, the maximum that will be accepted is UIDIGI, the 
minimum UID
UIDIGICallSubstitution is in error, the maximum that will be accepted is 
UIDCSB, the mimimum UIDC
UIFloodCall is too long, the maximum that will be accepted is UIFLOOD, 
the mimimum is UIF
UIFLOODOptions is in error, the maximum that will be accepted is 
UIFLDFL, the mimimum is UIFLD
UITRraceCall is too long, the maximum that will be accepted is UITRACE, 
the minimum is UIT
UITRACEOptions is in error, the maximum that will be accepted is UITRFL, 
the minimum is UITRF

There are lots of other errors, so I am thinking that perhaps you were 
not trying to give the actual commands to be used, but rather more 
descriptive ones?

In any case the list should probably be reworked to correspond to 
exactly what a sysop can type in a remote session, or what the UIDIGI 
compiler will accept.

I am curious if you have actually confirmed by experiment that the 
suggested parms (UID, UIDC, UIF, UIFLD, UIT and UITRF) set as you 
suggest actually have the desired 'new paradigm' effect?

Ron, N5IN



Bruce, KQ4TV wrote:

> On Apr 5, 2005, at 8:19 PM, Brian Webster wrote:
>
>> Can anyone point me to a web page that will show settings for ui-digi 
>> to set
>> it up properly to use the new wide-n scheme?
>>
>>
>>
>> Brian, N2KGC
>>
>
> I will post an example here for discussions sake. Later I will put 
> this on a web page.
> N8DEU's web page has a good explanation of UIdigi parameters.
> Hopefully he will update it if he chooses to adopt the changes for the 
> new paradigm.
>
> /*
>     UIDIGI Configuration source file
>         Version 1.9 BETA 3 20040101
>     Written by Marco Savegnago IW3FQG
> */
> DigipeaterCallsign     =       WB0NOO-2
> DigipeaterAlias        =       UIDIGI
> BeaconDestination      =       APZ193
> InfoText               =       UIDIGI1.9BETA3 LastMod20050303 
> kq4tv.at.bwm.us see www.nashvilleaprs.net
> NorthPath              =
> SouthPath              =
> EastPath               =
> WestPath               =
> BudList                =
> UIDigiCall             =       
> RELAY,OHX,TN,WIDE3-3,WIDE4-4,WIDE5-5,WIDE6-6,WIDE7-7
> UIDIGICallSubstitution =       1
> UIFloodCall            =       TN
> UIFLOODOptions         =       1
> UITraceCall            =       WIDE
> UITRACEOptions         =       0
> TxDelay                =       30
> FullDuplex             =       0
> PPersistance           =       255
> SlotTime               =       1
> Frack                  =       5
> Maxframe               =       4
> Retry                  =       10
> RespTime               =       100
> LinkCheck              =       18000
> DuplicateSuppression   =       30
> LoopSuppression        =       3
> HandleUISSID           =       0
> ReplyToQuery           =       1
> PreemptCalls           =
> PreemptAdd             =
> PreeemptedDigipeat        =       0
> UIMessage              =       1
> UIOnly                 =       1
> UIPID                  =       0
> SysopPassword          =       yes there is something here
> Beacon1Interval        =       1200
> Beacon2Interval        =       2400
> Beacon3Interval        =       4800
> Beacon1Offset          =       0
> Beacon2Offset          =       600
> Beacon3Offset          =       1800
> Beacon1Text            =       
> !3615.49NS08654.31W#PHG5560/W-R-TN-OHX-Wn-N Nashville,TN
> Beacon2Text            =       
> !3615.49NS08654.31W#PHG5560/W-R-TN-OHX-Wn-N Nashville,TN
> Beacon3Text            =       
> !3615.49NS08654.31W#PHG5560/W-R-TN-OHX-Wn-N Nashville,TN
> BeaconDestination      =       APNU193
> Beacon1Path            =
> Beacon2Path            =       WIDE
> Beacon3Path            =       WIDE2-2
> AuxPath                =
> AuxDestination         =       AUX
> AuxRate                =       0
>
> For Northern Middle Tennessee I am inclined to make the following 
> changes:
>
> UIDigiCall             =      
> RELAY,OHX,TN,WIDE1-1,WIDE2-1,WIDE2-2,WIDE3-1,WIDE3-2
> UITraceCall            =      OHX
>
> This is to allow wide dissemination of OHX WX information without it 
> traveling outside the interested area.
> I see BMX Bulletins in Nashville So I suppose that they might be 
> seeing OHX Bulletins in Birmingham.
> I am hoping that this might work to keep the packets closer to the OHX 
> coverage area.
>
> Comments are welcome.
>
> Bruce, KQ4TV
>
> -- 
> Bruce W. Martin, KQ4TV
> Trustee for NT4UX
> Nashville Linux User Group - Amateur Radio- Special Interest Group
> NLUG-AR-SIG
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig





More information about the aprssig mailing list