[aprssig] New n-N settings for ui-digi

[Robert Bruninga]

Thanks.
Yes, the UIDIGI ROM is something that is a real benefit
to the future of APRS, so I too am hopeful that the guru's
will translate the New n-N paradigm to the best configuration
for these ROMS and if there are any changes to the original
code needed, that then we might ask the author to fix them.

The only shortcoming I konw of so far is the inability to do
the variable local/distant beaconing.  But this is minor...  Bob

>>> aprs at almostanywhere.com 4/6/05 3:29:23 PM >>>
For this particular digi it probably is a cut-off. It may go that 
direction but I have not burned the EPROM yet. I am considering it for

best (not widest) dissemination of WX bulletins for our area and to cut

off the insane WIDE7-x,TRACE7-x packets we see out of Iowa and Illinois

here in Tennessee. I just wanted a little more discussion regarding 
UIdigi that I thought was lacking. The new n-N Paradigm discussions 
seemed to circle around setting up KPC3+ equiped digis and UIview32.

Bruce

On Apr 6, 2005, at 1:49 PM, Robert Bruninga wrote:

> For clarification, The following appears to be taking the
> "cut-off" solution. which was an early-on proposal to turn off
> WIDEn-N and force all WIDEx-x Paths to ONE hop in
> very overloaded areas.  But as the New n-N Paradigm further
> evovled, the "cut-off" solution (in my opinion) was no longer
> needed in most places and is rather limiting...  Or maybe
> I missread this?  Bob
>
>>>> tim_cunningham at mindspring.com 4/6/05 12:00:52 PM >>>
> Hi Bruce,
>
> I looked through your settings.
>
> Your beacon text string shows support for the "W" or WIDE alias but
> your
> UIDigiCall setting does not support this. You might want to change
one
> of
> the settings so they match.
>


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org 
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig