Order Tray | Contact Us | Home | SIG Lists

[aprssig] Re: d700 miniDIN

Stephen H. Smith wa8lmf2 at aol.com
Sat Apr 16 06:15:55 UTC 2005


scott at opentrac.org wrote:

>I discovered something interesting on my TM-271 - seems that the 1200 baud
>receive signal isn't fixed level.  I was running a tracker off of it and
>found that it wouldn't show the channel as busy with the volume down.  It's
>pretty easily fixed by using the squelch output instead, but I thought the
>mini-DIN signals were supposed to be standardized.
>
>  
>
They are supposed to be.  Could you have hit the wrong pad on the PC 
board while restoring the miniDIN I/O?

>Anyone seen this on other radios?
>
>Scott
>  
>
.Looks like Kenwood screwed up on this one. 

The levels on my Kenwoood D700,  TS-690, TS-711 and TS-811 are all 
fixed. As are the outputs on my Yaesu FT-1500 2M and FT-100 allband/all 
mode.


Stephen H. Smith             wa8lmf (at) aol.com
                                                    
Home Page:                   http://wa8lmf.com

New/Updated "Rev G" APRS     http://webs.lanset.com/wa8lmf/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:





More information about the aprssig mailing list