[aprssig] KPC3+ and dupe checking.

[Chuck Kimball]

Good Evening:

I've been playing this afternoon with a couple of digi's that I'm 
preparing for putting on the mountain tops shortly (once the snow melts).

I'm not seeing any duplicate checking going on with the KPC3+ running 
Version 9. 0 
Both were running with UITRACE WIDE,28. 

I believe I have all the settings as described in Bob's KPC3 
documents.    The only dupe prevention that appeared to be happening was 
when they were both transmitting at the same time.  (hence not hearing 
each other).    For testing purposes, I turned on UIDWait on GWS, and 
got the dupes, as listed below.

Isn't the dupe suppression supposed to be inherent to the UITRACE?  Or 
is in only because they don't hear each other with UIDWait off? 

I also was testing the DigiNed that I've built and it did an excellent 
job of dupe suppression.  The last two entries are with the digiNed node 
turned on. 

Any thoughts?   Am I missing something or a setting on the KPC3+s?

Thanks
Chuck Kimball  n0nhj
Glenwood Springs, CO


-------
GWS = KPC3+ V9.0        N0NHJ-2 = KPC3+ V9.0

17:11:47T N0NHJ>APU25N,WIDE3-3 Port=1 <UI C Len=63>:
=3932.90NI10719.92W&Ski Country IGate n0nhj at amsat.org {UIV32N}

17:11:51R N0NHJ>APU25N,GWS*,WIDE3-2 Port=1 <UI C Len=63>:
=3932.90NI10719.92W&Ski Country IGate n0nhj at amsat.org {UIV32N}

17:11:52R N0NHJ>APU25N,N0NHJ-2*,GWS*,WIDE3-1 Port=1 <UI C Len=63>:
=3932.90NI10719.92W&Ski Country IGate n0nhj at amsat.org {UIV32N}

17:11:53R N0NHJ>APU25N,GWS*,N0NHJ-2*,WIDE3-1 Port=1 <UI C Len=63>:
=3932.90NI10719.92W&Ski Country IGate n0nhj at amsat.org {UIV32N}

--------------------------
GWS = KPC3+ V9.0   N0NHJ-2 = KPC3+ V9.0

17:14:34R N0NHJ-13>APT311,N0NHJ-2*,WIDE3-2 Port=1 <UI Len=43>:
/231424h3932.89N/10719.91W[275/000/A=005780

17:14:35R N0NHJ-13>APT311,GWS*,WIDE3-2 Port=1 <UI Len=43>:
/231424h3932.89N/10719.91W[275/000/A=005780

17:14:35R N0NHJ-13>APT311,N0NHJ-2*,GWS*,WIDE3-1 Port=1 <UI Len=43>:
/231424h3932.89N/10719.91W[275/000/A=005780

17:14:36R N0NHJ-13>APT311,GWS*,N0NHJ-2*,WIDE3-1 Port=1 <UI Len=43>:
/231424h3932.89N/10719.91W[275/000/A=005780

------------------------------
GWS = KPC3+ V9.0   N0NHJ-2 = KPC3+ V9.0  LKOUT = DIGINED

17:17:46R N0NHJ-13>APT311,N0NHJ-2*,WIDE3-2 Port=1 <UI Len=43>:
/231738h3932.89N/10719.91W[275/000/A=005800

17:17:47R N0NHJ-13>APT311,LKOUT*,WIDE3-1 Port=1 <UI Len=43>:
/231738h3932.89N/10719.91W[275/000/A=005800
 -- DigiNed is removing one hop from the path on purpose. WIDE3-3 gets 
repeated and becomes WIDE3-1

17:17:48R N0NHJ-13>APT311,LKOUT*,N0NHJ-2*,WIDE3* Port=1 <UI Len=43>:
/231738h3932.89N/10719.91W[275/000/A=005800

17:17:49R N0NHJ-13>APT311,GWS*,WIDE3-2 Port=1 <UI Len=43>:
/231738h3932.89N/10719.91W[275/000/A=005800

17:17:50R N0NHJ-13>APT311,N0NHJ-2*,GWS*,WIDE3-1 Port=1 <UI Len=43>:
/231738h3932.89N/10719.91W[275/000/A=005800

17:17:51R N0NHJ-13>APT311,LKOUT*,GWS*,WIDE3* Port=1 <UI Len=43>:
/231738h3932.89N/10719.91W[275/000/A=005800

17:17:52R N0NHJ-13>APT311,GWS*,N0NHJ-2*,WIDE3-1 Port=1 <UI Len=43>:
/231738h3932.89N/10719.91W[275/000/A=005800

-----------------------------------------------------------------
GWS = KPC3+ V9.0   N0NHJ-2 = KPC3+ V9.0  LKOUT = DIGINED

17:35:26R N0NHJ-13>APT311,WIDE3-3 Port=1 <UI Len=43>:
/233518h3932.91N/10719.92W[241/000/A=005701

17:35:27R N0NHJ-13>APT311,N0NHJ-2*,WIDE3-2 Port=1 <UI Len=43>:
/233518h3932.91N/10719.92W[241/000/A=005701

17:35:28R N0NHJ-13>APT311,LKOUT*,WIDE3-1 Port=1 <UI Len=43>:
/233518h3932.91N/10719.92W[241/000/A=005701

17:35:29R N0NHJ-13>APT311,LKOUT*,N0NHJ-2*,WIDE3* Port=1 <UI Len=43>:
/233518h3932.91N/10719.92W[241/000/A=005701

17:35:31R N0NHJ-13>APT311,GWS*,WIDE3-2 Port=1 <UI Len=43>:
/233518h3932.91N/10719.92W[241/000/A=005701

17:35:32R N0NHJ-13>APT311,N0NHJ-2*,GWS*,WIDE3-1 Port=1 <UI Len=43>:
/233518h3932.91N/10719.92W[241/000/A=005701

17:35:32R N0NHJ-13>APT311,LKOUT*,GWS*,WIDE3* Port=1 <UI Len=43>:
/233518h3932.91N/10719.92W[241/000/A=005701

17:35:33R N0NHJ-13>APT311,GWS*,N0NHJ-2*,WIDE3-1 Port=1 <UI Len=43>:
/233518h3932.91N/10719.92W[241/000/A=005701