[aprssig] Icom mic connector
Ed L. Locklear, KF4CHG
kf4chg at earthlink.net
Tue Aug 16 11:47:53 CDT 2005
Randy Allen - KA0AZS wrote:
> Short answer, Yes
> I'm using a pre made MFJ TNC-Radio cable from my MFJ-1270 to my IC-2000H and it's been running for years. It pulls receive audio from the speaker jack and transmit audi and PTT control from the mic plug.
> You can roll your own by using CAT V network cable and RJ-45 plugs.
> I took a short CAT V jumper that I salvaged and cut it in half to get 2 pre-wired "microphone" ends, and have used the digram in the manual and a multi-meter to pin out and build replacement mike and TNC cables.
> Hope this helps
Then use this: http://www.packetradio.com/images/IC2100TNC2.gif
More information about the aprssig