Order Tray | Contact Us | Home | SIG Lists

[aprssig] Kantronics KPC3+ Issue

Robbie, wa9inf mwrobertson at comcast.net
Wed Dec 7 14:38:38 UTC 2005


Duffy,

If I am not mistaken, it would indicate the pc, or software is not 
allowing communications from the tnc and the buffer of the tnc is full.. 
You may have the port misconfigured??

Robbie

Amateur Radio WB8NUT wrote:

> Lately, no matter which APRS application I use with the KPC3+, the 
> Connect (Con) LED will come on and stay on sometimes once a day, 
> sometimes it happens every hour or so. Of course when this happens, 
> the TNC will not transmit the beacon packets although the application 
> does send that command to the TNC.  Just while the Con LED is on, the 
> TNC will not send the beacon.  The only way to reset it is to turn off 
> the TNC and turn it back on.  Any ideas as to what is causing this and 
> how I might be able to prevent this condition from happening in the 
> future?  Another ham said to use XKISS with the AGWPE, which I tried 
> but that did not solve the problem.
>
> Thanks,
>
> Duffy
> www.wb8nut.com
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>






More information about the aprssig mailing list