[aprssig] Voice Repeater Posits...

Richard Montgomery kb4ytm at gmail.com
Thu Dec 8 09:15:21 CST 2005

Hey Bruce,

This is what I use to advertise local repeaters using the btext and 
beacon function of the kpc-3's that are used as digi's.

BT ;442400   *000000z3623.39N/08913.48Wm PL 1318 KA4BNI West Link Rptr 

That shows a 442400 label on the users screen that are in direct view of 
the digi site. The information text shows the PL tone used on the 
repeater. This ones uses the MIC-E symbol, but I may change it to a 
antenna icon or something as its not a mic-e repeater.

I cant hear these repeaters from my house so I dont know if there is 
increased activity on the repeaters as a result of the broadcasts.

I have seen others using IRLP and ECHOLINK node numbers instead of 

You can also add objects using UIView32 but it goes out to your default 
path like wide2-2 or whatever. Most repeaters dont talk 2 digi hops away 
(at least around here they dont) so its pointless to advertise a 
repeater 100 miles away when most mobiles couldnt even hear it that far.

Now if only UIDigi software would ID with some custom text that would be 


Bruce W. Martin, KQ4TV wrote:
> On Dec 7, 2005, at 10:23 PM, Robert Bruninga wrote:
>> Also, local ECHOlink, IRLP and Winlink nodes should
>> also appear on the front panel of your D7 or D700 radio.
>> de Wb4APR, Bob
> How is this supposed to work? I know we have at least one IRPL and  one 
> ECHOlink node in town but have never seen info about these show  up on 
> my display. Both operators use APRS to varying degrees but I am  not 
> sure that they know what they need to do to "Advertise" their nodes.
> Bruce


APRS Traffic heard on 144.390 in Lexington, TN

Archived APRS traffic

More information about the aprssig mailing list