Order Tray | Contact Us | Home | SIG Lists

[aprssig] IP Based Modems (TNCs)

Bill Diaz william.diaz at comcast.net
Sat Dec 10 16:36:11 UTC 2005

  Replying off list,
 Take a look at http://www.digi.com 
They have some RS232 to IP converters.  Kinda neat, in that you can use a
Hardware Serial port on your computer to talk to the remote RS232 port over
the Internet.  You could use UiView on the computer and have it work with a
TNC across town, or on the other side of the world.
Some of these units can operate in both directions.  That is, it can
automatically connect to a station, or will accept a connection from a
Been looking at these for remotely controlling satellite ground stations,
including D700, rotators etc.  Looks promising.

-----Original Message-----
From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org]
On Behalf Of Christensen, Eric
Sent: Saturday, December 10, 2005 10:07
To: aprssig at lists.tapr.org
Subject: [aprssig] IP Based Modems (TNCs)

Has anyone thought about building a modem (TNC) that can be controlled via
IP?  I'm thinking of a modem with a RJ-45 in the back vice the RS-232 and
assign it a static IP and just send data to it.  I could imagine some really
interesting scenarios with that combination.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tapr.org/pipermail/aprssig/attachments/20051210/79f3bb23/attachment.htm 

More information about the aprssig mailing list