[aprssig] Re: D700 and NMEA waypoints

[Stephen H. Smith]

scott at opentrac.org wrote:
>  > The D700's APRS settings are set for NMEA in & out (so in APRS mode 
> it sends the waypoints) 
>  
> What other modes does it support?  Can it do something besides NMEA?
>  
> S
By itself in standalone "APRS" mode, it only does NMEA.   Anything else 
would require "PACKET" mode with an external device (PIC 
microcontroller, PC with software, etc) communicating via the main 
serial port to do the conversions.







Stephen H. Smith    wa8lmf (at) aol.com
EchoLink Node:      14400    [Think bottom of the 2M band]
Home Page:          http://wa8lmf.com

"APRS 101"  Explanation of APRS Path Selection & Digipeating
  http://webs.lanset.com/wa8lmf/DigiPaths

Updated APRS Symbol Chart
  http://webs.lanset.com/wa8lmf/miscinfo/APRS_Symbol_Chart.pdf   


New/Updated "Rev G" APRS     http://webs.lanset.com/wa8lmf/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:





-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tapr.org/pipermail/aprssig/attachments/20051231/0234047c/attachment.htm