[aprssig] Ultimeter II & KPC3+

[Kurt O. Jauss]

    First verify that the Wx station outputs a !! or # string. Then 
program the TNC for ...
GPSH 1 !!  or
GPSH 1 #
BTP 1 e 00:05:00
LTP GPSHW  via WIDE2-2

    Good luck

Kurt

Bruce, KQ4TV wrote:

> I have a KPC3 Plus (v8.3) that I am using at home with my Igate 
> (RIMiGate).
> I have hooked my Ultimeter II to the GPS port, the second read-only 
> serial port wired through the radio port.
> I am using the following settings:
>
> gpshead 1 #
> LTP 1 aprs via wide,OHX2-2
> BLT 1 every 00:05:00
> GPSPORT 2400 NORMAL CHECKSUM
>
> The station location is showing up via both RF and internet but I am 
> not seeing any WX data.
> Has anyone else successfully made this work?
>
> Bruce
> -- 
> Bruce W. Martin, KQ4TV
> Trustee for AA4VU
> Vanderbilt University Amateur Radio Club
>
>
> _______________________________________________
>