Order Tray | Contact Us | Home | SIG Lists

[aprssig] Ultimeter II & KPC3+

Bruce, KQ4TV aprssig at almostanywhere.com
Mon Feb 7 15:18:12 UTC 2005


Yes, I have confirmed that the UII us using # as the first character in 
it's output.
Is the GPSHW in LTP that significant?

BTW, it would seem that Kantronics has eliminated the second (software) 
serial port capability in the 9.0 firmware of the KPC3+

Bruce, KQ4TV

On Feb 2, 2005, at 9:34 AM, Kurt O. Jauss wrote:

>    First verify that the Wx station outputs a !! or # string. Then 
> program the TNC for ...
> GPSH 1 !!  or
> GPSH 1 #
> BTP 1 e 00:05:00
> LTP GPSHW  via WIDE2-2
>
>    Good luck
>
> Kurt
>
> Bruce, KQ4TV wrote:
>
>> I have a KPC3 Plus (v8.3) that I am using at home with my Igate 
>> (RIMiGate).
>> I have hooked my Ultimeter II to the GPS port, the second read-only 
>> serial port wired through the radio port.
>> I am using the following settings:
>>
>> gpshead 1 #
>> LTP 1 aprs via wide,OHX2-2
>> BLT 1 every 00:05:00
>> GPSPORT 2400 NORMAL CHECKSUM
>>
>> The station location is showing up via both RF and internet but I am 
>> not seeing any WX data.
>> Has anyone else successfully made this work?
>>
>> Bruce
>> -- 
>> Bruce W. Martin, KQ4TV
>> Trustee for AA4VU
>> Vanderbilt University Amateur Radio Club
>>
>>
>> _______________________________________________
>>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig





More information about the aprssig mailing list