[aprssig] PCSAT Digi onto normal APRS channels

[Wes Johnston]

sounds like a simple fix to me....
Wes
--



Quoting Eric Christensen <kf4otn at earthlink.net>:

> So the path wouldn't look like PCSAT-1*,SGATE*,WIDE?
>
>
> 73s,
> Eric KF4OTN
> kf4otn at amsat.org
> http://www.ericsatcom.net
>
> Project OSCAR Member
> AMSAT-NA Member: 35360
> AMSAT Eastern North Carolina Area Coordinator
>
> -----Original Message-----
> From: Robert Bruninga [mailto:bruninga at usna.edu]
> Sent: Monday, February 07, 2005 18:47
> To: kf4otn at earthlink.net; aprssig at lists.tapr.org; vk4tec at tech-software.net
> Subject: Re: [aprssig] PCSAT Digi onto normal APRS channels
>
>
> Because the PCSAT WEB page is driven only by
> packets seen as PCSAT-1*.    After going thought
> the satgate, then they show as SATGATE*.
>
> Bob
>
> >>> Eric Christensen <kf4otn at earthlink.net> 2/7/05 6:21:29 PM >>>
> Why would the fact it went via PCSAT-1 be lost?  If he is running his
> digipeater with the alias of SGATE, then the only packets that would be
> digipeated by him are the ones that have a path similar to:
> "PCSAT-1,SGATE,WIDE".  The path would stay intact.
>
> 73s,
> Eric KF4OTN
> kf4otn at amsat.org
> http://www.ericsatcom.net
>
> Project OSCAR Member
> AMSAT-NA Member: 35360
> AMSAT Eastern North Carolina Area Coordinator
>
> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org]
> On Behalf Of Robert Bruninga
> Sent: Monday, February 07, 2005 18:14
> To: aprssig at lists.tapr.org; vk4tec at tech-software.net
> Subject: Re: [aprssig] PCSAT Digi onto normal APRS channels
>
>
> This is not a good idea, since once it gets digipeated to
> the terrestrial channel the fact that it went via PCSAT-1
> is lost.  It wont show up on FINDU...    Bob
>
> >>> "Andrew Rich" <vk4tec at tech-software.net> 2/7/05 4:44:26 PM >>>
> Howdy,
>
> I was thinking of placing a radio on 145.825 with an alias of satgate. It
> would then have an offset to the normal APRS freq here of 145.175. The idea
> being that when PCSAT or ISS turn up, the TNC will try and
> digi them, flick up to the normal APRS channel.
>
> I am just wondering would I need to set the UI path to relay to go via
>
> the local digi ?
>
> Ideas ?
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>