[aprssig] New symbol for Winlink/IRLP/Echolink nodes needed??

[Spider]

In my uiview, I've changed most of the symbols to appear as I need them. 
Currently, mine looks like a red square with a white interior.  The overlay 
looks aok.....but I am not an artist!

Jim

----- Original Message ----- 
From: "Steve Dimse" <steve at dimse.com>
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
Sent: Wednesday, February 16, 2005 5:03 PM
Subject: Re: [aprssig] New symbol for Winlink/IRLP/Echolink nodes needed??


On 2/16/05 at 4:56 PM Spider <spider at rivcom.net> sent:

>In UI-View is the defined as the ARRL/RSGB symbol   Alternet set and "a".
>The graffic....if you look really close is the ARRL icon which is a diamond
>for the blind...like me!  It does have ARRL RSGB written vertically in
>it...if you can see that...most probably can not.  Winlink uses this symbol
>with an O'ly of W.
>
Yes, I know the icon, you can see it on the telpac.cgi page. At the 16 bit 
size
there is nothing written on the interior, even the overlay W does not fit 
within
it because the diamond is narrow. Still, that was the icon chosen by 
WinLink,
all we can do is display it ;-)

Steve K4HG


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig