[aprssig] d700 in mic-e mode
mckeehan at mckeehan.homeip.net
Fri Feb 18 21:15:26 CST 2005
Can you give some details on how you setup the repeater to mute the packet burst?
On Fri, February 18, 2005 4:32 pm, Wes Johnston said:
> And now for something completely different!
> We finally got one of our repeaters setup for MIC-e and muting the packet
> Packets are gated over to 440 (since the repeater is so close in frequency to
> 144.39), and at the main IGATE site, we digipeat the 440 packets back onto 2m.
> Has anyone ever noticed when using the d700 in PTT mode (ie mic-encoder mode)
> that the radio doesn't always send a posit right as you unkey? It will send a
> position about 1 to 2 seconds later every once in a while. I thought at
> it was hearing some packets on 144.39 just as I unkeyed, and that was causing
> to hold off, so as an experiment, I unkeyed with the squelch turned down all
> way on the data side of the radio and that did not cause it to hold off tx...
> could it be that the radio is processing a packet or sending a waypoint to the
> GPS at the moment I unkey and that's the holdup?
> Sure is aggrivating... since when it doesn't TX right away when I unkey, it
> TX 2 seconds later when the other party I'm talking to has just started
> and it blanks him out for a second or so.
> aprssig mailing list
> aprssig at lists.tapr.org
Internet: mckeehan at mckeehan.homeip.net
More information about the aprssig