Order Tray | Contact Us | Home | SIG Lists

[aprssig] APRS routing strategies

hasan schiers schiers at netins.net
Thu Feb 24 00:17:35 UTC 2005


Larry, N0BKB and I have tested your approach and it works. Thanks! Of course 
we used IA instead of your GA in your example.

We have also confirmed that the alias list in ui-view32 appears to be nearly 
unlimited. We have put WIDE7-7 through 7-2 and 6-6 through 6-2 and 5-5 
through 5-2 and 4-4 through 4-2 in the alias box of ui-view32 digipeater 
setup and it works! We are now fully trapped and can add more if need be.

p.s., RELAY will remain supported in Iowa. We are telling mobiles to use the 
path:

RELAY,WIDE2-2

and home stations: WIDE2-2


Thanks again for the note. 73

...hasan, N0AN

----- Original Message ----- 
From: "John Kraus" <jfkraus3 at cox.net>
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
Sent: Tuesday, February 22, 2005 9:07 AM
Subject: Re: [aprssig] APRS routing strategies


> At 09:41 AM 2/22/2005, you wrote:
>> >>> "hasan schiers" <schiers at netins.net> 2/18/05 8:25:03 PM >>>
>> >What makes WIDEn-N traceable? It hasn't been in the past.
>>
>>By moving WIDEn-N from the UIFLOOD parameter in the
>>digis over to the UITRACE parameter.
>>
>> >Are there changes to (in the case of UI-View32)
>> >the *.ini file that allow this to happen...
>>
>
> Below is the pertinent section of UIVIEW32.INI found in the install 
> directory for UI-VIEW32.
>
> I suspect that simply changing UIFLOOD=WIDE and UITRACE=TRACE to 
> UIFLOOD=GA
> UITRACE=WIDE will let this happen. I simply don't have the time right now 
> to test it.
>
>
> [DIGI_OPTIONS]
> DIGI_ENABLED=TRUE
> UI_ONLY=TRUE
> ALIAS_SUBSTITUTION=TRUE
> DUPE_SUPPESS_SECONDS=30
> ALIAS=KC4ZGQ-10,RELAY
> UIFLOOD=WIDE
> UITRACE=TRACE
> WIDEN-N=TRUE
> TRACEN-N=TRUE
> SUBST_ALIAS=KC4ZGQ-10
> EXCLUDED=""
> [DIGI_ROUTES]
> 1=1






More information about the aprssig mailing list