[aprssig] APRS in Iowa

[Chuck Gooden]

Thanks for the info.  I'll switch to wide2-2 before I leave.


On 27 Feb 2005 at 20:08, hasan schiers wrote:

> What is your call and what route are you taking?
> 
> Mike gave you the preferred path..RELAY,WIDE2-2
> 
> Notice...no WIDE support in much of Iowa any longer, we reconfigured over 
> the last few days and there is no longer any support for WIDE or TRACEn-n.
> 
> Mobiles use: RELAY,WIDE2-2  (that gives you 3 hops and our digis are HIGH)
> Fixed Stations use: WIDE2-2
> 
> There is a good concentration of digis from Omaha, NE to Davenport, IA along 
> I-80, and they will all support the paths above.
> 
> Have fun, look forward to tracking you.
> 
> 73,
> 
> ...hasan, N0AN
> ----- Original Message ----- 
> From: "Chuck Gooden" <cgooden at insightbb.com>
> To: <aPRSsig at lists.tapr.org>
> Sent: Sunday, February 27, 2005 6:45 PM
> Subject: [aprssig] APRS in Iowa
> 
> 
> > Will be traveling to Cedar Rapids, IA next week and I am wondering if
> > there is any APRS activity there?
> >
> > Also is "Relay, Wide"  the correct settings still for a TH-D700A
> > installed in a van?
> >
> > Thanks,
> >
> >
> >
> >
> >
> > _______________________________________________
> > aprssig mailing list
> > aprssig at lists.tapr.org
> > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> > 
> 
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>