[aprssig] KPC-3+ and power mod?

[Wes Johnston]

Yes, there is a jumper setting to select between pin 7 on radio port and
pin 13 on serial port... of course I just removed the jumper and
soldered both options ON.

J6 needs to be center & 2, J7 needs to be center and 1, but I soldered
all 3 pins of j7 together.

Important difference.... kpc3 uses pin 25, kpc3plus uses pin 13. 
Probably important if you plan to use the same serial cable on several TNCs.

Wes

Earl Needham wrote:

>
>     Does the latest KPC-3+ allow power to be output on the DB-25, like
> the earlier ones did?  I remember you had to solder two pads together,
> and then you could power GPS or whatever from the TNC without running
> a separate power lead.
>
>     Thanks,
>     Earl
>
> Earl Needham, KD5XB, Clovis, New Mexico DM84jk
> http://kd5xb-2.no-ip.info
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig