Order Tray | Contact Us | Home | SIG Lists

[aprssig] Relay filter

Christensen, Eric H CHRISTENSENE at MAIL.ECU.EDU
Fri Jul 22 10:15:22 UTC 2005


I won't comment on the obvious...
 
BUT, for $20-$30 (I think) you can get an OpenTracker that will more flexible than your current system.
 
73s,
Eric KF4OTN

________________________________

From: aprssig-bounces at lists.tapr.org on behalf of Earl Needham
Sent: Thu 21-Jul-05 21:26
To: TAPR APRS Mailing List
Subject: RE: [aprssig] Relay filter



At 09:29 AM 7/21/2005, Cap Pennell wrote:
>What is a hard coded tracker?  Who has one?

         I have one.  It's an old MFJ TNC that loses it's settings so much
that I had a special chip burned for it.  This chip has KD5XB-9, a path of
WIDE,WIDE5-5, etc., all set as the defaults, so when the TNC loses it's
settings and reloads everything from scratch, it'll still work.

>How did they get RELAY in
>there?  Can't they get a modern digipath in there the same way?

         Uh -- no.  I brought the thing in a few weeks ago and tried to
change the callsign to KD5XB-10 and set a shorter path, but as soon as I
fired it up in the truck, everything was back to the burned-in settings.

         And, since the whole discussion over trackers and 2-hop paths, you
can only find my callsign on PropNet.  I'll probably have a mobile tracker
again sometime in the future.

         7 3
         Earl


Earl Needham, KD5XB, Clovis, New Mexico DM84jk
http://kd5xb-2.no-ip.info



_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig


-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 4835 bytes
Desc: not available
Url : http://www.tapr.org/pipermail/aprssig/attachments/20050722/969de80f/attachment.bin 


More information about the aprssig mailing list