[aprssig] Re: PATH clarification when travelling

[Stephen H. Smith]

wa8lmf2 at aol.com wrote:

> .
> In the case of the D700, or a TinyTrack, alternate paths can be stored 
> in the device (5 in the case of the Kenwoods, 2 in the case of the 
> TinyTrack) and then selected as needed enroute.     You might store a 
> path of  "RELAY, WIDE, WIDE2-2" in one mode,  and "WIDE2-2" or 
> "WIDE1-1, WIDE2-2" in the other. 
>
>

Forgot to mention that the TinyTrack can also be configured to 
ALTERNATELY beacon it's two different path settings.  You could place a 
path with RELAY, WIDE in one half and WIDE1-1,WIDE2-1 in the other 
half.   One or the other would then work just about anywhere,  at the 
price of having half your beacons ignored in any given area.




Stephen H. Smith    wa8lmf (at) aol.com
EchoLink Node:      14400    [Think bottom of the 2M band]
Home Page:          http://wa8lmf.com

New APRS Symbol Chart
  http://webs.lanset.com/wa8lmf/miscinfo/APRS_Symbol_Chart.pdf   

New/Updated "Rev G" APRS     http://webs.lanset.com/wa8lmf/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tapr.org/pipermail/aprssig/attachments/20050729/926cd92a/attachment.htm