[aprssig] Delorme

[Ron]

I have been running a RS Digitravlier with my D700 for about 3 years and it works very well.  Recently I thought I would try running a Delorme with a D7.  The Delorme works with USB or the serial adaptor they provide with  the battery tray, when directly connect to 2 different computers.   Unfortunately following Kenwood's instruction of shield to pin 5, Red to Pin 3, and White to Pin 2 of the DB9 I got no results.  I thought there could be a typo so I reversed Pin 2 and 3 with the same results.  Then I decided to try the Delorme with my D700 and again no results.  Am I missing something or are there different Serial Data standards for Delorme?  I think I'm missing something but can' seem to find what's going on.  Thanks for your help.
WA2WWK
Ron
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tapr.org/pipermail/aprssig/attachments/20050611/9202a4d5/attachment.htm