Order Tray | Contact Us | Home | SIG Lists

[aprssig] winaprs station display??

Wes Johnston aprs at kd4rdb.com
Thu Jun 16 21:07:04 UTC 2005


I downloaded winaprs today, haven't run it in probably two or three
years.  Thought I'd break out the TNC in the garage and play - haven't
used a TNC in months.

In the terminal window, I can see the data that the TNC is hearing, it's
all on one line as it should be, no problem.

Winaprs seems to only show stations heard on RF directly though... I
don't mean direct as in "no hops", I mean direct as in not 3rd party
packets.  You see, here in our town, kc4pl is the igate,and everyone
usually connects to him via TCP/IP, so most of the packet on the air
here are 3rd party, but they aren't showing up.

after many many minutes of monitoring, I only show about 4 stations
around me and they are on RF.  The objects (like the local repeater
signposts), and other stations on TCP/IP do not show... even though I
saw them go past on the terminal window.

Ideas?  Is something set wrong? broken?

Wes




More information about the aprssig mailing list