[aprssig] Universal digi path
ke4tzn at cox.net ke4tzn at cox.netFri Jun 17 13:16:18 UTC 2005
- Previous message: [aprssig] TS-2000 on UI-View APRS
- Next message: [aprssig] Universal digi path
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Just to let you know that the digi that covers the outer banks does support WIDEn-N and SSn-N but is having some antenna problems. A local Igate also supports RELAY and, WIDE1-1. If you go far south on the outer banks there is no APRS coverage. Also the digis that had WIDEn-N removed it has been put back in. John KE4TZN > > From: "Cap Pennell" <cap at cruzio.com> > Date: 2005/06/16 Thu PM 10:57:46 EDT > To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org> > Subject: RE: [aprssig] Universal digi path > > Have you tried plain WIDE2-2 ? I see stations nearby you using it > successfully. Good luck. > Some digis "cut-off" WIDE3-3 as too broad, but allow WIDE2-2 (or > WIDE1-1,WIDE2-1). > 73, Cap KE6AFE > > > -----Original Message----- > > From: aprssig-bounces at lists.tapr.org > > [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of n4qwf at ntelos.net > > Sent: Thursday, June 16, 2005 17:09 PM > > To: aprssig at lists.tapr.org > > Subject: [aprssig] Universal digi path > > > > > > Here I am on the outer banks of North Carolina. I was here two weeks ago > > and enjoyed seeing my position reported on Findu without any problem. I > > was using the Tiny track and Kenwood V7A in my wifes car then. I am sure > > the Proto path was set to Wide3-3. While I have been here this week using > > my D700 and the same path I don't see my position digipeated. I see other > > stations on my screen without any trouble and the node shows up all ok but > > no ack of my postion. I setup my D7 HT and monitored my transmissions and > > I showed up on my Winaprs map here at the house so I know I am sending a > > good positions. When I left home the Wide 3-3 worked just fine till I got > > to Currituck and then it stopped working. My question is has the alias of > > the path been changed or something. I have tried the call of the node, > > Wide, Wide1-1, Wide3-3, relay, NC1-1 among many proto paths without any > > lucky. I would think there should be a path setting that should work > > regardless of where you travel. If that is not the case what is a fellow > > to do while on the road. After all that is what APRS was supposed to be > > about I thought. Well maybe someone can clue me in on what gives. Thanks > > for any help! 73's << John > > > > > > _______________________________________________ > aprssig mailing list > aprssig at lists.tapr.org > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig >
- Previous message: [aprssig] TS-2000 on UI-View APRS
- Next message: [aprssig] Universal digi path
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
