[aprssig] Intermediate Resources

[Cap Pennell]

You're hitting WX3SMD-15 on your first digi hop, so a path of only WIDE2-2
(or WIDE1-1,WIDE2-1) will suffice.  Though across the country from you, some
good understandable info is at http://nwaprs.org
73, Cap KE6AFE

> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org
> [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Christopher Long
> Sent: Saturday, June 18, 2005 10:26 AM
> To: aprssig at lists.tapr.org
> Subject: [aprssig] Intermediate Resources
>
>
> Can anyone point me to some intermediate level
> resources regarding APRS.  Most of what I've found on
> the subject has either been so basic or outdated that
> it is of limited value (i.e. the ARRL book on the
> subject), or addresses the advanced points of the
> subject, many of which are a bit beyond me right now.
>
>
> Specifically I just bought a Kenwood D700 and would
> like to configure it properly.  I know that RELAY,WIDE
> seems to be wrong based on the conversations I read
> here, but I'm not clear on what is right.
> RELAY,WIDE2-2? WIDE2-2 only? some other combination.
<snip>