[aprssig] MFJ-1270b

[Ron Stordahl]

Sorry...bad typing:

Go to http://dxspots.com/fix14439_uidigi-rom.html for set up info for 
New-N. 

The UIDIGI-ROM code can be found at the UIDIGI Yahoo Group at the 
address listed in the above doc.

I am running version 1.9Beta3 which is the last version available.  It's 
completely reliable, although it could use some updating.

Ron, N5IN

Ron, N5IN

Ron Stordahl wrote:

> Go to http//dxspots.com/fix14439_uidigi-rom.html for info on setting 
> up UIDIGI-ROM for this tnc.
>
> Ron, N5IN
>
> Patrick Green wrote:
>
>> Put the UIDIGI firmware in it!  That's the only way I know.
>>
>> 73 de Pat --- KA9SCF.
>>
>> On 6/24/05, William McKeehan <mckeehan at mckeehan.homeip.net> wrote:
>>  
>>
>>> Is there anyway (short of connecting a computer to it) to configure an
>>> MFJ-1270b TNC to support the new WIDEn-N paradigm?
>>>
>>> -- 
>>> William McKeehan
>>> KI4HDU
>>> Internet: mckeehan at mckeehan.homeip.net
>>> http://mckeehan.homeip.net
>>>
>>> _______________________________________________
>>> aprssig mailing list
>>> aprssig at lists.tapr.org
>>> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>>
>>>   
>>
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at lists.tapr.org
>> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>  
>>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig