[aprssig] D700 not showing on internet

[Robert Bruninga]

OK,
I assumed everyone new that I was only talking
about WIDEn-N packets.  Those are all subject
to a 30 second or so timer in ALL digis.  Sure
RELAY  and WIDE can be duped as often and
as rapidly as you want.  Still another reason why
WIDEn-N is where we should be going for network
health...  Bob

>>> vk4tec at tech-software.net 06/24/05 3:44 PM >>>
bit of a bold statement Bob

We have a UI-DIGI digi and a standard TNC dig here.

I can pump out packets and the TNC digi will digiepeat me, but the ui-digi
will ignore dups in 30 secs.

-----Original Message-----
From: Robert Bruninga [mailto:bruninga at usna.edu] 
Sent: Friday, 24 June 2005 11:08 PM
To: aprssig at lists.tapr.org; cedwards at trane.com 
Subject: Re: [aprssig] D700 not showing on internet


>>> cedwards at trane.com 06/24/05 8:13 AM >>>
>We have a d700 that does transmit it's position
>sometimes... However, most of the time, the
>packets do not get through a digi regardless for
>the path.... is there a setting on the D700 that
>may prevent a digipeater from retransmitting the
>packets.

Yes, and it applies to any station.  Remember,
ALl digipeaters will refuse to digi a packet within
30 seconds or more of the last identical one.
So just banging away at a digi with the same
packet will only get digipeted once in 30 secs.
Appears to be poor statistics, when it is really
only the digi protecting the network from
abuse.  This is another of the New-N advantages.
Bob

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org 
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig 


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org 
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig 



_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org 
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig