[aprssig] What does one need to post local APRS data on Findu.com?

[Richard Montgomery]

You just need a nearby Igate to get your position on Findu.com . I see 
N0CTM puts most of your position packets onto Findu about 15 miles SW of 
your location. I also see a digi N1EXT-5 near N0CTM. If that digi no 
longer supports WIDE, then you may need to change your path to WIDE2-2. 
I see you now have WIDE,WIDE2-2. There are lots of software packages 
that will put your position on Findu that you can run at home. I 
personally use UI-View, but there are several that work well.   Just my 
thoughts. 73

Richard



Kriss & Erin Kliegle wrote:

> Here's one for the group, what software, hardware does one need to get 
> local APRS feed onto the findu site?
> We have spotty coverage here in SE New Hampshire, see KA1GJU-3  at:
> http://www.findu.com/cgi-bin/wxpage.cgi?call=KA1GJU-3
>  
> I realize one needs a 24/7 connection to the internet, but what else?
>  
> Kriss
> KA1GJU
> KA1GJU-3 100% Solar Powered WX Digi
> KA1GJU-9 VW Jetta TDI
>  
>  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>aprssig mailing list
>aprssig at lists.tapr.org
>https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>  
>