[aprssig] KPC-3 DIGI settings for New n-N

ab9fx at aprs.pl ab9fx at aprs.pl
Tue Mar 1 22:32:45 CST 2005

I did some simple tests, maybe we need some more. But it seems that
MYALIAS is very useful for limiting path like WIDE,WIDE,WIDE
If MYALIAS is WIDE then after digipeating packet with original path like
WIDE,WIDE,WIDE appears as WIDE*,WIDE,WIDE and none of other digis WIDE
will repeat it again, because WIDE was already repeated.
Andy AB9FX

> ----- Original Message -----
> From: "Robert Bruninga" <bruninga at usna.edu>
> To: <aprssig at lists.tapr.org>
> Sent: 01 March, 2005 10:42
> Subject: [aprssig] KPC-3 DIGI settings for New n-N
>>I finally found my own password for our local digi and
>> so finally got to change it to the new Paradigm..
>> Learned:  The MYALIAS does digipeat but does not do callsign
>> substitution.  Thus, MYALIAS of RELAY is not a good idea.
>> So I set  my UIDIGI to ON RELAY,WIDE5-5,WIDE6-6,WIDE7-7
>> You might choose to use the MYALIAS of RELAY if you really
>> want to use all the UIDIGI parameters for trapping, but
>> you wont get  the digi call.  In my case, since this is an alt-freq
>> digi, it is mandatory that the RELAY get susbtituted by the
>> digi's call (99ANAP) so we know the packet originated on
>> 144.99 and how it got to 144.39.
>> Bob
>> _______________________________________________
>> aprssig mailing list
>> aprssig at lists.tapr.org
>> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

More information about the aprssig mailing list