[aprssig] TM-271A

[Scott Miller]

Well, if I had the mini-DIN connector, I wouldn't need the signals at the
mic connector.  I figure I'll just run a wire to the RJ45 if I can find a
good spot to connect it - probably the audio pot.

Thanks,

Scott
N1VG
----- Original Message ----- 
From: "Stephen H. Smith" <wa8lmf2 at aol.com>
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
Sent: Thursday, March 10, 2005 10:41 AM
Subject: Re: [aprssig] TM-271A


> scott at opentrac.org wrote:
>
> >Has anyone tried to mod the TM-271A to bring the audio output to the mic
> >connector like the TM-261?  Or is that conductor used for something else?
> >
> >
> >
> I've done exactly this with my D700.   I ran a wire from the fixed-level
> RX audio on the MIniDIN-6 "acc" connector to the unused contact on the
> mic jack.  Works perfectly.