[aprssig] Earthmate USB and APRS

Stephen H. Smith wa8lmf2 at aol.com
Wed May 25 21:23:30 CDT 2005


kkotch at earthlink.net wrote:

>
> I don't know if this emulator will work with other USB gps but I don't 
> see why not. 
>
>  
>
> 73,
>
> Keith, KF4BXT
>
Actually, all GPS devices produce traditional serial output.  In the 
USB-interfaced versions of these devices, the serial output is 
converted, inside the GPS, to USB by the same kind of 
application-specific IC (ASIC) used in stand-alone serial-to-USB 
converter cable "dongles".  [ The net effect is exactly the same as if 
you had used a serial GPS with an EXTERNAL serial-to-USB converter 
cable, but with the added convenience of powering the GPS from the USB 
port.  And of course, a thinner, lighter cable with no mated male/female 
DB9s in the middle.]

There are several different serial-to-USB chipsets, from different 
vendors, in use.  The drivers for these chips are very device specific, 
and are NOT interchangable.   Unless another USB GPS just happens to use 
exactly the same USB chipset as the Delorme,  the Delorme driver will 
not work with it.




Stephen H. Smith             wa8lmf (at) aol.com
                                                    
Home Page:                   http://wa8lmf.com

New APRS Symbol Chart
  http://webs.lanset.com/wa8lmf/miscinfo/APRS_Symbol_Chart.pdf   

New/Updated "Rev G" APRS     http://webs.lanset.com/wa8lmf/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:

 

 






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig/attachments/20050525/8cc918af/attachment.html>


More information about the aprssig mailing list