[aprssig] D700 Problem on APRS

[William McKeehan]

My guess is that you are using a path that is no longer supported.

It looks like you are currently using RELAY,WIDE

Try changing that (your PACKET PATH) to WIDE2-2 and see if things start
working again.

On Wed, October 5, 2005 6:22 pm, nsaamiller said:
> Group-
>
> Strange problem on my D700:  I no longer get a MYPOS acknowlegement or beep.
> It does transmit just after the TNC opens.  This happened earlier, appeared to
> correct itself and now it has recurred.  I have reset the radio, checked the
> appropriate connections, and it operates properly on voice.  The various
> controls appear to operate properly on the menus.  I seemed to get fewer
> "hits" from nearby stations last few days, now I get no hits.  On FINDU, I
> show up only from a day or so ago.  Any ideas?
>
> charles
> w0cjm
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>


-- 
William McKeehan
KI4HDU
Internet: mckeehan at mckeehan.homeip.net
http://mckeehan.homeip.net