[aprssig] Do I have the proper settings on a 'KPC3P-E6ED7265-8.2'

[Cap Pennell]

Reply mixed in below.

-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Kriss & Erin Kliegle
Sent: Wednesday, October 26, 2005 17:47 PM
To: aprssig at lists.tapr.org
Subject: [aprssig] Do I have the proper settings on a 'KPC3P-E6ED7265-8.2'
<snip>

Also isn't there a command to download all parameters??

-- DISPlay  (but it's tough to use remotely)  And there's DISP A, DISP C,
DISP G, DISP I, DISP L, DISP M, DISP P, or DISP T.

prompt:ver
KPC3P-E6ED7265-8.2   (is this the wierd on w/the bug? What is the "E6ED"? Is
it older or new than 7265-8.2?? ARGH!)

-- It's a KPC-3Plus.  This version is not too old or a problem.  Should be
fine with xxxx7265-8.2 (but needs WIDE1-1 in UIDigi like you show below).

prompt:uiflood
UIFLOOD  WIDE,30,ID

-- This is incorrect and a problem.  Should not be WIDE,30,ID.  Should be
(in New Hampshire):
UIFlood  NH,30,ID


prompt:uidigi
UIDIGI   ON WIDE1-1,WIDE4-4,WIDE5-5

-- Could add one more alias here (4 max) like WIDE4-3 or WIDE3-3


prompt:uitrace
UITRACE  WIDE,30
prompt:uidwait
UIDWAIT  OFF

-- Right.  And MYAlias NONE (or disabled, not RELAY or WIDE or TRACE).


Here's just a few samples taken this evenbing.....

-- How many digis can you hear besides KA1GJU-3?
-- 73, Cap KE6AFE


N1XH-15>APTW01,KA1GJU-3*,WIDE3-1:_10270818c266s002g000t039r000p021P000h98b10
090tU2k
<snip>