[aprssig] Re: D700 PS2 conenctor
Stephen H. Smith
wa8lmf2 at aol.com
Tue Sep 6 04:44:10 CDT 2005
vk4tec at tech-software.net wrote:
>What on earth is the PTT pin on the D700 ?
>I am using the PS2 connector
>aprssig mailing list
>aprssig at lists.tapr.org
Pin 3 which Kenwood confusingly labels "Standby". It's just a normal
ground-to-key PTT line.
Note that on the D700 the connections on this jack follow the "selected"
band for the mic. I.E. if the mic is keying the left side of the
radio, the mini-DIN6 lines are also connected to the left. If the mic is
keying the right side of the radio, the mini-DIN6 is also connected to
Full details on the miniDIN6 "PS/2" packet or data connector, including
an enlarged diagram useful as a wiring worksheet, are in this file on
Look for the file MiniDIN6-Packet.pdf
Stephen H. Smith wa8lmf (at) aol.com
EchoLink Node: 14400 [Think bottom of the 2M band]
Home Page: http://wa8lmf.com
"APRS 101" Explanation of APRS Path Selection & Digipeating
Updated APRS Symbol Chart
New/Updated "Rev G" APRS http://webs.lanset.com/wa8lmf/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig