[aprssig] Help setting up Kenwood D700A

Wes Johnston aprs at kd4rdb.com
Thu Sep 15 13:57:20 CDT 2005

every Garmin I've seen has a delete by symbol option (kinda hard to find
on some models).... since the d700 generated waypoints are always
defaulting to dots, I just periodically delete all "dot" symbol
waypoints.  The other option is to limit the range on the d700 to 100 miles.


Curt, WE7U wrote:
> On Thu, 15 Sep 2005, Vic Fraenckel wrote:
>>...DOUG KD4MOJ wrote:
>>And really all you need is the ground and TX from the GPS is you don't want all those waypoints flooding back to your GPS. I had that problem with the Garmins... getting
>>the data FROM the D700 populating my waypoints in the GPS.
>>I did not realize that this could happen. Should I disconnect the TO GPS (DATA OUT) wire?
> On the Garmins you have NMEA-IN/NMEA-OUT setting on your Interface
> menu.  Just don't enable NMEA-IN and you won't have this happen.
> It's nice to be able to turn that on and see APRS stations on your
> GPS map screen, so if I were you I'd at least hook up the wires so
> you have that capability if you decide later that you want it.  You
> can always delete waypoints by type to get rid of all of them at
> once, without disturbing your other waypoints.
> --
> Curt, WE7U.   APRS Client Comparisons: http://www.eskimo.com/~archer
> "Lotto:    A tax on people who are bad at math." -- unknown
> "Windows:  Microsoft's tax on computer illiterates." -- WE7U
> "The world DOES revolve around me:  I picked the coordinate system!"
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

More information about the aprssig mailing list