Order Tray | Contact Us | Home | SIG Lists

[aprssig] RE: Worldwide satellite ground station status page

Andrew Rich vk4tec at tech-software.net
Wed Sep 21 20:28:21 UTC 2005


Ya missed my point. Richard was gating at the time.

He did not gate his own packet.

-----------------------------------------
Andrew Rich - VK4TEC
Satellite Ground Station for PCSAT2
vk4tec at tech-software.net
www.tech-software.net
Brisbane AUSTRALIA

-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of A.J. Farmer (AJ3U)
Sent: Thursday, 22 September 2005 1:11 AM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] RE: Worldwide satellite ground station status
page


If an IGate heard the packet direct from RS0ISS-3, then it would be
gated to the IS as normal.

The second option would be a ground station set up as a
sat-to-terrestrial digi which responds to "SGATE".  If it heard the
packet, then it would respond to "SGATE" and digi the packet onto the
terrestrial network which would then hopefully be picked up by a
terrestrial IGate.

A while back WB4APR suggested that when parked and away from your
vehicle to set your D-700 to receive on an APRS satellite frequency
and transmit on the terrestrial APRS frequency.  Then enable digi with
the alias of "SGATE".  If enough people did this, then it would
quickly and easily add many SATGates to the system but it requires
stations transmitting to the satellite to add "SGATE" to the end of
their path.  This can be set up in a D-700 PM so it is just two button
presses to put it in this mode while parked, and two button presses
when you get back in to resume normal ops.

Anything in the path after "SGATE" would be applied to the terrestrial
network.  In the example packet you gave, "WIDE" is after "SGATE" so
any digi on the terrestrial network that responds to "WIDE" would also
digi the packet.  A better path choice today would probably be
"SGATE,WIDE1-1" or  "SGATE,WIDE2-2".

The only side effect is a temporary increase in terrestrial APRS
traffic during a pass, and operators in the area wondering why
stations from hundreds of miles away are showing up all of a sudden.
:-)

A.J.

On 9/21/05, Andrew Rich <vk4tec at tech-software.net> wrote:
> Under APRS IS rules, can this packet be injected back into the aprs
network
> using VK3JFK ?
>
> 2005-09-21 12:02:05 22:02:05R VK3JFK>APRS,RS0ISS-3*,SGATE,WIDE Port=1 <UI
> Len=46>:
> =3715.00S/14421.00E-73' Via Satellite {UISS41}
>
> I can not seem to find Rcihards gate from satellite to IS
>
> Ideas ?
>
>
> -----------------------------------------
> Andrew Rich - VK4TEC
> Satellite Ground Station for PCSAT2
> vk4tec at tech-software.net
> www.tech-software.net
> Brisbane AUSTRALIA
>
> -----Original Message-----
> From: Andrew Rich [mailto:vk4tec at tech-software.net]
> Sent: Wednesday, 21 September 2005 5:13 PM
> To: Amsat-Bb; TAPR List; VK / ZL APRS Users
> Subject: Worldwide satellite ground station status page
>
>
> Gudday,
>
> I am going to put togther a tabular display of those stations that have
> heard or digied via a satellite in the last 24 hours.
>
> If you would like to be part of this project please let me know.
>
> So far I have PCSAT, ISS and PCSAT2.
>
> This is be a live web page, as derived from the APRS-IS stream.
>
> All you have to do is submit you callsign and add to the project.
>
> Cheers Andy VK4TEC
>
> back soon with more details.
>
> -----------------------------------------
> Andrew Rich - VK4TEC
> Satellite Ground Station for PCSAT2
> vk4tec at tech-software.net
> www.tech-software.net
> Brisbane AUSTRALIA
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>


--
A.J. Farmer, AJ3U
http://www.aj3u.com

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig






More information about the aprssig mailing list