[aprssig] UI-DIGI dupe

[Ron Stordahl]

Not positive that this thread is about the UIDIGI firmware (which I call 
UIDIGI-ROM to avoid confusion with the term UIDIGI which is used in such 
devices as the KPC3+ etc), but if it is, then I have just verified that 
a UIDIGI-ROM firmware equiped TNC2 (for example MFJ1270B/C) configured 
per http://dxspots.com/FIX14439_UIDIGI-ROM.zip properly does duplicate 
suppression based upon the setting "DuplicateSuppression = 30", which is 
the value stated in my example configurations.  My testing was done with 
paths of WIDE1-1,WIDE2-1; WIDE1-1,WIDE2-2; and WIDE1-1,WIDE3-3.  The 
path actually has nothing to do with the DuplicateSuppression of 
course.  Identical packets sent within a 30 second period were ignored. 

Ron Stordahl, N5IN


Robert Bruninga wrote:

>>>> jronan at tssg.org 04/07/06 9:05 AM >>>
>>>>         
>> my position packet had been rebroadcast 4 times. 
>> This shouldn't have  happened ...
>>     
> EI7IG-9 to UR1UQW via WIDE1-1 WIDE2-1 
> EI7IG-9 to UR1UQW via EI3RCW-4* WIDE2-1 
> EI7IG-9 to UR1UQW via EI3RCW-4* EI2MLD* WIDE2 
> EI7IG-9 to UR1UQW via EI2TTD* WIDE2-1 
> EI7IG-9 to UR1UQW via EI2TTD* EI2MLD* WIDE2 
>
> The EI2MLD appears to be not properly doing
> dupe elimination on the WIDE1-1.  
>
>   
>> EI2MLD and EI3RCW-4 are NSR digi's...
>>     
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>